Lipping for MX-pipe grate 180x2750mm

The MX pipe support grid can be equipped with retrofittable MX pipe support edge strips. The edge strips are used especially for additional support at the bottom of deep trenches. It is possible to install the edge strips on one or both sides.

The MX pipe support edge strip is 2750 mm in length. The edge strips are overlapped by 500 mm in the longitudinal direction, requiring two edge strips per side of the MX pipe support grid. The edge strips are attached to the MX pipe support grid with screws (e.g., 4.8×25 mm). The attachment interval is 500–600 mm. The distance between the fasteners and the ends of the MX pipe support grid is 100–200 mm.